The https://neoncave.co.uk/ is a stylish and versatile type. With their brightly lit designs, neon signs are easy to spot and make a statement at night as well.
The same concept is used to make LED neon signs. They are made from LED neon flex light. They look as good as regular neon signs. The best thing? The best part? You can create an LED neon sign yourself by following a few simple steps.
Are you curious? This is all you need to know about creating an LED neon sign or get Custom neon signs uk .
Table of Contents
What are LED Neon Signs?
What are the requirements to make an LED neon sign?
Designing the Sign
Sign Making
Conclusion
What are LED Neon Signs?
Glass tubes filled with inert gases such as neon and halogen are used to make typical neon signs. These gases become illuminated when an electric current passes through them.
While neon signs can be great, they can also be costly. Because glass is susceptible to breaking, they can be costly and require a lot of maintenance.
LED neon signs eliminate the design issues of traditional neon lighting. Instead of using glass tubes, LED neon flex light is used to make them. They are cheaper, more flexible, and last longer. They provide consistent lighting, unlike inert gases which can be stronger in certain parts.
What are the requirements to make an LED neon sign?
It is easier than you might think to shop for LED neon signs DIY projects. These are the items you will need:
There are two types of LED neon flex light: RGBW and RGBW. The RGBW is a great option if you want a greater selection of colors for your signs.
The substrate or base is the surface where your signage will be placed. This could be wood, expanded vinyl, or a wall.
Use wire cutters to trim the LED neon flex light to fit your sign.
Conductor wire of 20 gauge is the ideal thickness.
A spool full of thread
A soldering iron
Drills that can be held in the hand
Adhesive
Designing the Sign
Drawing is a person’s art.
Flexible LED neon flex light allows you to design your sign in a variety of ways. You can cut them into any length you desire to achieve the shape that you want.
Either draw your sign sketch directly on the substrate or use CAD or illustrator software. Because LED neon flex lights come jacketed, they are slightly thick so make sure you space your letters correctly.
Also, all lights must be connected to a circuit in order to work. Each section must be connected to its neighbor. If your sign is written, you should use a cursive font.
Making the Sign
After you have collected everything you need, it’s time to make your LED neon sign come to life. Here is a step by step guide to assist you in doing just that.
Place your sign sketch onto a work surface
Sketch the sketch using the thread. This will allow you to determine the length of the LED neon flex light you will require.
Use the estimate to cut a portion the LED neon flex light strips. You will likely find markings on each strip that can help you determine where you should cut. The lights could be damaged if you make the wrong cuts.
Place the LED neon lights on the sketch. Make a cut every time you reach the end of a letter/shape.
Drill holes — The holes should be located at the end of each strip, or the point where it connects with the next.
Connect the conductor wire to each section of LED neon Flex Lights. Each time you cut, a wire edge in the light strip was exposed. Connect the wires to each other and solder them together.
Conceal the connection: When you solder a connection, guide your soldering wire towards the substrate’s back and then thread it back to the next letter/shape. This conceals the connections at the substrate/base.
Place the LED neon flex light bulbs in their proper place.
